Hair and scalp treatment laser  + Mesotherapy or maintenance treatment

Use :

• This product cannot be used while it is being charged.
• Unplug the charger after charging.
• Press and hold the On/Off button for about 2 seconds, the warning tone length is 'beep'; represents product start up; default mode 1 after start up.
• After switching on, press the on/off button to change the mode.
• Mode 1: fast massage + infrared light Mode 2: slow massage + infrared light
• Mode 3: Slow and fast massage + infrared light

Adding Liquids - Vitamins - Nourishing Oils - Mesotherapy Products

• 1. Open the liquid tank cap and add the appropriate products according to your own dosage. It is recommended to add less than 3ml to avoid wastage.
• 2. It is recommended to clean the liquid reservoir after each use to keep the product clean.
• 3. Maintenance solutions of different brands and concentrations may lead to different uniformity of ball discharge speed, too low concentration may have a small amount of leakage, please clean it in time.
• 4. Special attention: To prevent damage to the product, do not add unknown substances or corrosive liquids.
  Timer function
• Smart timing for 10 minutes.
• Switching off
• Press and hold the On/Off button to turn the product off.

Cleaning the product

• 1. If you need to clean the exterior, rinse directly with water (plastic surface).
  Do not allow water to come into contact with the bottom charging socket.
• 2. It is recommended to rinse the fluid reservoir and fluid outlet hole with clean water after each use to prevent clogging, wipe the product clean and store in a ventilated and dry place.
• 3. Maintenance solutions of different brands and concentrations may cause different uniformity of ball discharge speed, too low concentration may cause a small amount of leakage, please clean up in time.
• 4. Special attention: To prevent damage to the product, do not add unknown substances or corrosive liquids.
• Timer functionSmart timing for 10 minutes.
• Switching off
  Press and hold the On/Off button to turn the product off.

Cleaning the product

• 1. If you need to clean the exterior, rinse directly with water (plastic surface).
  Do not allow water to come into contact with the bottom charging socket.
• 2. It is recommended to rinse the fluid reservoir and the fluid outlet hole with clean water after each use to prevent clogging and the product should be wiped clean and stored in a ventilated and dry place.
  1. During normal use of the product, 'humming', 'clicking' and other noises may occur as part of the normal operation of the product, this is normal.