Graft Channel Depth Measurement Device

Canals are personalised by opening them prior to graft placement.

• It has a digital display and a manual display.
• It is used to measure the depth of the channels opened for graft placement.
• The tissue structure of each individual is different and the depth of the incision and channels should be personalised.
• For this reason, the depth of the channel to be opened must be individually determined and finalised before the procedure begins.
• The tip length of Slid, Bade, Saphire or similar products should be adjusted according to the channel depth determined.
  In this way, as the grafts are placed exactly at the required depth, the healing rate will be much faster and graft loss will be almost zero.

How to use ;

• Sterilise the stainless medical steel section at the end of the device using a steriliser - disinfectant.
• Open a canal with the burr and check it with a slit lamp. When you are sure of the depth, insert the pointed end of the device into the canal.
• The depth is displayed digitally on the tip and manually on the back.
  In this way, adjust the blade length on the handle to which you attach the blade length, adjust the type of blade you will make the incision and open the canals with equal and necessary cuts all over the area.